A lot of Huntsville searches for custom staircase and railings near me, custom staircase and railings Huntsville, or staircase railings land on a welding shop. Rocket City Stairs is the other trade: interior hardwood millwork. We replace or upgrade the guard on a stair you already walk — wood handrails, newel posts, and wood or matte black metal balusters — finished to the treads and the floor they meet. The work is the same recipe we have used on North Alabama interiors for twenty years: keep a sound structure, replace what does not belong, and stain on the actual wood under your light.
Railing replacement is usually a remodel of what is already there. Old turned spindles come out. A skinny builder rail that never matched the hardwood comes out. We set newels plumb, run a continuous handrail that follows the pitch, and install balusters that belong with the stair, not a kit bolted on after someone else left. The same quote can include recut treads and skirt boards if the walking surface also needs to change.
Wood handrails and newel posts are the backbone of the job. An oak cap stained to the adjoining plank reads as one interior. Painted newels work when the rest of the millwork is painted. Wood balusters match existing trim. Matte black metal balusters with that same oak handrail are the mixed look many newer two-story homes ask for. We sample both against your actual wood under your light before we commit the run.
Swapping old spindles is a common Huntsville and Madison request. The stringer is sound. The treads may already be hardwood, or they are still carpet. We pull the old guard, check the newel locations, and install a rail that meets typical residential interior practice. As general IRC guidance — not a code manual for your house — handrails usually sit in the 34-to-38-inch height range, and baluster spacing is set so a four-inch sphere cannot pass. Exact height and spacing are confirmed on the written estimate at the house, because openings, pitch, and existing newels vary.
Adding a railing during a carpet-to-hardwood stair makeover is one job when the structure works. We pull the carpet and padding, install solid oak treads and risers, and set the new rail in the same visit so you are not coordinating a fabricator after the treads go in. If the whole run needs more than a guard — recut nosings, newels, skirt boards — that is a staircase remodel. A brand-new stair for an addition is a custom staircase installation. Handrails, newels, and balusters are also available as stair parts with or without installation.
Not a metal staircase fabricator
Searches for metal staircase installation near me usually mean outdoor steel, a welded stair, or commercial metal fabrication. That is not this shop. Rocket City Stairs is an interior hardwood stair specialist. We install matte black metal balusters as part of a wood handrail and newel system on an interior stair. We do not weld outdoor steel stairs, deck rails, or commercial metal packages. If you need a metal-only exterior rail, call a fabricator. If you need a Huntsville interior stair railing that matches the oak in the hall, call (256) 665-2161.
Lived-in houses are why we run virtually dustless containment. Stairs sit in the middle of the home. Extraction stays up while we pull old spindles, set newels, and finish the cap so dust does not travel the ductwork. There is no public shop address. Josh Templet comes to the house with a tape and a written estimate. This page does not publish public prices — every rail is quoted after we see the opening, the pitch, and the floor it has to meet. Licensed and fully insured; owner-operated out of Alabama Hardwood Restoration.
How a custom staircase railing job works in Huntsville
Rocket City Stairs quotes and installs interior staircase railings in Huntsville: free on-site estimate, wood or matte black metal choice, install with dust containment, then finish and walkthrough.
- 01
Free on-site estimate and measure
Josh measures the run, checks the existing newels and pitch, and writes a free on-site estimate for the rail — or for a rail plus a carpet-to-hardwood makeover.
- 02
Choose wood, matte black metal, or mixed
You choose a wood handrail and newels with wood balusters, matte black metal balusters, or a mixed wood-and-metal guard. We sample the look against your treads and floor.
- 03
Install the railing with dust containment
We set newels plumb, run a continuous handrail, and space balusters to typical residential interior guard practice, with virtually dustless containment in a lived-in house.
- 04
Finish and walkthrough
The rail is finished to the adjoining hardwood. We walk the completed guard with you before we leave.
Finished interior railings
These gallery photos show wood caps, newels, and wood or matte black metal balusters — the interior railing work we quote. They are not labeled as a named project or street. See the stair gallery.
Where we install staircase railings
The same interior railing work is quoted across North Alabama: stair makeovers in Huntsville, stair makeovers in Madison, Harvest (35758) stair makeovers, custom staircase railings in Decatur, stair makeovers in Hartselle, interior stair makeovers in Cullman, staircase railings in Athens, hardwood stair makeovers in Moulton, and stair remodel in Gurley. We come to the house. There is no public shop address. Call (256) 665-2161 or request a free estimate.